Undercarriage Pressure Washer Attachment Kit – 4 Nozzles & Extension Wands
Undercarriage Pressure Washer Attachment Kit – 4 Nozzles & Extension Wands
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Undercarriage Pressure Washer Attachment Kit – 4 Nozzles & Extension Wands
TAKE YOUR WASH FURTHER
Clean beyond
the surface.
Your bodywork gets the attention. Give the underside a rinse, too. This wheeled undercarriage attachment directs four water jets upward, helping you reach beneath your vehicle from the driveway.
4 spray nozzles · 2 wheels · 3 wand sections
Reach the part your regular wash misses.
Road dirt and splash collect out of sight. Add an underbody rinse to your car-care routine with a cleaning head designed to roll beneath the vehicle, while you guide it using the connected wand.
01 / UPWARD SPRAY
Four nozzles. A focused rinse.
Four upward-facing spray nozzles distribute water along the black cleaning bar to rinse accessible underbody surfaces as you move the attachment.
02 / WHEELED SUPPORT
Roll into position.
Two wheels support the cleaning head on the ground. Guide it beneath areas with suitable clearance instead of holding the spray bar above the driveway.
03 / EXTENDED REACH
The angle makes the difference.
Two straight wand sections and one curved section connect together to help you approach beneath the vehicle from a lower angle. The sections separate for organized storage after use.
04 / QUICK CONNECTION
Connect to your compatible setup.
A 1/4-inch quick-connect fitting joins the attachment to compatible pressure-washer equipment. Confirm your connection and equipment requirements before use.
Your kit, at a glance.
Black bar, four spray nozzles, two wheels and central brass fitting.
Separate connecting wand sections.
An angled approach beneath the vehicle.
Attachment kit only. Pressure washer, hose and trigger gun are not included.
A simple addition to wash day.
1. Check your setup
Confirm fitting compatibility, operating requirements and vehicle clearance. Park on a level surface and allow hot components to cool.
2. Assemble and secure
With the washer switched off and pressure released, connect the wand sections and cleaning head. Check that every quick-connect fitting is locked.
3. Guide the rinse
Follow your pressure washer and vehicle care instructions. Move the head slowly beneath accessible areas, keeping the spray directed away from people and sensitive components.
4. Finish and store
Switch off, release pressure and disconnect. Drain and dry the attachment before storing the sections together.
Check before you order.
- Your equipment must accept a compatible 1/4-inch quick-connect fitting.
- Check that the cleaning head can fit beneath your vehicle.
- Confirm the kit’s pressure and flow requirements with the seller before connecting it to your washer.
Good to know.
Is this a complete pressure washer?
No. This is an undercarriage cleaning attachment kit. It requires compatible pressure-washer equipment, sold separately.
Will it fit every pressure washer?
Fit depends on the connection and operating requirements of your equipment. Check compatibility before ordering; a 1/4-inch fitting alone does not confirm that every washer is suitable.
How many nozzles are included?
The cleaning head in this kit has four upward-facing spray nozzles.
Can I use it beneath a low vehicle?
Measure the available clearance and compare it with the actual cleaning head dimensions before use. Do not force the attachment beneath the vehicle.
Does it remove every type of buildup?
Results depend on your pressure washer, the surface and the type of dirt. This attachment is designed for rinsing; heavy or stubborn deposits may need additional cleaning.
Give the underside a place in your routine.
A wheeled cleaning head. Four upward jets. A connected approach to underbody care.
Collapsible row
Collapsible row
Track your order
Please enter you tracking number below. If your tracking number doesn't work feel free to contact us at [shop email]